Froth n Flames Commitment to Safety
Froth n Flames is committed to product quality and safety. Please read the below 'Candle Saftety Tips' on candle care and candle safety, and thank you for shopping at Froth n Flames.
For optimal burning, candles should achieve a full melt pool on the first burn. This means burn the wax all the way to the edge of the candle, this usually takes 1 hour per inch of diameter. This is because soy wax has a memory effect. This means if you only burn a small melt pool the wax will remember this and all subsequent burns will only burn to this size pool effectively causing a tunnelling effect and an uneven burn.
A natural carbon build up may collect on the wick, usually occurring with the highly scented natural wax candles. Our candles are scented to the maximum level that the wax will hold.
After extinguishing your candle, it is recommended that you dip the wick in the melted wax, using a non-flammable instrument. After dipping, reposition the wick in an upright position. What follows below are Candle Safety Tips from Froth n Flames.
Candle Safety Tips
Candles are safe products, but unless they are used safely and watched carefully, they can lead to an accidental fire.
Froth n Flames urges consumers to be careful when burning candles, and to following these rules for burning candles safely.
- Always keep a burning candle within sight. Extinguish all candles when leaving a room or before going to sleep.
- Never burn a candle on or near anything that can catch fire. Keep burning candles away from furniture, drapes, bedding, carpets, books, paper, flammable decorations, etc.
- Keep candles out of the reach of children and pets. Do not place lighted candles where they can be knocked over by children, pets or anyone else.
- Trim candlewicks to ¼ inch each time before burning. Long or crooked wicks cause uneven burning and dripping.
- Keep the wax pool free of wick trimmings, matches and debris at all times.
- Always read and follow the manufacturer's use and safety instructions carefully. Don't burn a candle longer than the manufacturer recommends.
- Keep burning candles away from drafts, vents, ceiling fans and air currents. This will help prevent rapid, uneven burning, and avoid flame flare-ups and sooting. Drafts can also blow lightweight curtains or papers into the flame where they could catch fire.
- Never touch a burning candle or move a votive or container candle when the wax is liquid.
- Never use a knife or sharp object to remove wax drippings from a glass holder. It might scratch, weaken, or cause the glass to break upon subsequent use.
- Use a candle snuffer to extinguish a candle. It's the safest way to prevent hot wax from splattering.
- Make sure a candle is completely extinguished and the wick ember is no longer glowing before leaving the room.
- Extinguish a candle if it smokes, flickers repeatedly, or the flame becomes too high. The candle isn't burning properly and the flame isn't controlled. Let the candle cool, trim the wick, then check for drafts before re-lighting.
- Never use a candle as a night light.
- Always place candle on a heat proof coaster or mat to prevent heat damage to surfaces such as tables.
- Always place candle on a flat surface.
- If your candle is smoking or the flame is excessive, please extinguish and trim wick when cool and relight.